Just sharing a timelapse of a 18 hours print. The part is the Bird Feeder v4, designed by Printed nest. The print was done on a Leapfrog Creatr, with a layer height of 0.3mm and 80% infill. The Printed Nest team recommends a 100% infill but I try to avoid printing solid parts on printers that are not equipped with an active cooling system (which is the case of the Leapfrog Creatr). Else it is necessary to print very slowly in order to let the previous solid layer cool down before laying the next one on it.

The filament I used is from the PLA Opaque Series. Affordable, no knots in the spool, it flows great, the color is good enough an they have several afety certificatons on their Material Saety Data Sheet. If you woul like t get some, take a look at 3D-TRIP or even more intereting prices around the Montreal area.

Link to the video
If you liked this post, you can share it with your followers or follow me on Twitter!